Drywall Installation & Repair in Tempe, AZ

In additions and remodels, new drywall must blend with existing walls. Matching thickness at transitions, feathering joints carefully and replicating the existing texture ensure new walls look continuous with the rest of the home rather than standing out as obvious new work.

Drywall comes in different types for different locations. Standard drywall suits most walls and ceilings. Moisture-resistant board is used in areas exposed to humidity, though tile in wet areas requires a proper tile backer. Fire-resistant drywall is used where codes require fire separation, such as between an attached garage and living spaces. Choosing the right type ensures safety and performance.

After a fire, interior restoration includes cleaning or replacing smoke-damaged surfaces, sealing odours, repainting and restoring finishes. Soft materials and porous surfaces that cannot be cleaned are replaced. Thorough restoration removes lingering odours and returns interiors to a livable condition.

A careful assessment of interior conditions helps prioritise repairs and identify features worth preserving. Clear planning ensures work proceeds efficiently and that restoration enhances the home rather than erasing its original details.

Many Arizona homes feature textured walls rather than smooth finishes. Knockdown and orange peel textures are common, and they help disguise minor imperfections. Matching existing textures during repairs requires skill and experience.

Making repairs disappear depends on matching existing paint colours, sheens and wall textures. Paint can be colour-matched from samples, and textures such as knockdown or orange peel must be replicated carefully. Sometimes painting an entire wall or room produces a more uniform result than patching.

Interior restoration often involves balancing preservation with modern needs. Updating lighting, electrical and plumbing while preserving original features such as trim, doors and built-ins allows a home to function well today while retaining its character.

Interior restoration repairs and returns interior spaces to good condition after damage, wear or neglect. It can include repairing drywall and plaster, restoring trim and millwork, refinishing floors, repairing cabinetry, repainting and replacing damaged fixtures. The goal is to bring interiors back to their original condition or better, while preserving features worth keeping.

Hang sequence starts with ceilings, then walls top-to-bottom with butt joints staggered. Fastener spacing per GA-216 — 16" OC on ceilings, 16"–24" OC on walls. All joints taped with paper tape (not mesh on butt joints) bedded in setting-type mud. Three coats minimum, sanded between coats. Primer is shellac-based for any smoke- or water-stained substrate and PVA elsewhere. Texture is applied with calibrated hopper or air-driven gun — we test on cardboard against your existing wall sample to dial in match before spraying. Single-room scope: 3–5 days. Whole-home or full reconstruction: 2–4 weeks.

Rental properties often need interior restoration between tenants. Repairing wall damage, refinishing floors, repainting and updating worn fixtures prepares the unit for new occupants quickly. Durable finishes chosen during restoration reduce future turnover costs.

Older homes may have plaster walls rather than drywall. Plaster is harder and more durable than drywall, but it can crack, loosen from its lath or suffer water damage. Repairs require techniques and materials compatible with the original, and skilled plasterers can often repair damaged areas so they blend with surrounding walls.

Small bumps or circles appearing on walls and ceilings are often caused by fasteners working loose as framing shrinks or moves. Resetting the fastener, adding a new one nearby and refinishing the area usually resolves the problem.

We open with scope walk and photo documentation, especially on insurance work. For water and mold scope we verify moisture levels are dry and pass post-remediation criteria before reconstruction. Drywall is replaced in full sheets where damage warrants, then taped, floated, primed, and textured to match — orange-peel and knockdown matched with calibrated texture guns, not roller-stipple. Paint is sprayed wall-to-corner when possible to avoid roller-stipple mismatch. Flooring, trim, and fixtures follow, then a punch walk with the homeowner or adjuster. Single-room scope: 1–2 weeks. Whole-home: 4–10 weeks depending on extent.

Laundry rooms, bathrooms and areas near water heaters benefit from moisture-resistant drywall, which better tolerates humidity than standard board. It is not waterproof, however, and should not be used as a tile backer in showers or tub surrounds, where cement board or another approved backer is required to protect the wall assembly.